Building vessels for the future

"We build the LR2s based on our predictions for the future. If you build for the past, you’re not going to get very far."
To meet customer demand, sustain a competitive fleet and retain a strong market position, Maersk Tankers ordered six new LR2 vessels earlier this year.
Peter Bertelsen, experienced shipbuilder, is heading the site office at Dalian shipyard, China.  This is where the building of the vessels has just begun.
Therefore, the LR2 newbuildings will meet customers’ requirements for vessels that can make longer voyages more efficiently while keeping the cost per trade low.
Peter Bertelsen has during 13 years with Maersk, overseen the building of more than 70 vessels, 13 for Maersk Tankers.
Also, since 2014, as site manager, first in Korea, then in China, he has been supervising the building of Maersk Tankers’ current series of MR newbuildings.
“After having taken delivery of 13 out of the 19 MR newbuildings, it is time for me to hand over the responsibility and move on to Dalian shipyard to oversee the building of the LR2s,” says Bertelsen.

Building the vessels

The building process for each of the 110,000 DWT LR2s will take approximately 16 months.  Each vessel will consist of around 300 blocks and contain 161 km of cables. It will have 16,700 m2 of paint on the hull.
Bertelsen explains the process starts with “research on where to buy and what to buy exactly,” long before production begins.
In the process of yard selection, experienced site professionals assess the yards.  The assessment includes their capabilities and the quality of similar products. After signing a shipbuilding contract, the technicians come into the picture to write specifications. After approval, the yard will make drawings which are, in turn, reviewed by Maersk Tankers’ technical experts.
The production process starts with cutting the steel. Further milestones include

  • Keel laying.  Traditionally the keel was the beam around which the hull of the vessel was constructed.  Today it is the joining of the first modular components
  • Launching.  When the vessel goes into water for the first time
  • Sea trials.  During which it is tested whether the vessel is ready for operation
  • After successful sea trials and final tests, the vessel receives its name during a traditional naming ceremony and is finally delivered to the fleet

Transporting six different cargo grades

On the new LR2s, Maersk Tankers is installing separate cargo pumps for each tank instead of one set of central pumps. Certainly, this enables the company to transport six different cargo grades, giving customers more flexibility.
“In addition to that, we do a lot to optimise energy consumption,” adds Bertelsen.  These include frequency-controlled sea water pumps and the installation of low energy consuming equipment.
“With every new generation of vessels, we have a chance to make them more efficient. We build the LR2s based on our predictions for the future. If you build for the past, you’re not going to get very far,” says Bertelsen.
Therefore, the efficiency of the LR2s will enable Maersk Tankers “to meet its customers’ demands not only today, but also in the future.”
The six LR2 vessels are delivered over a period of two years.  The first batch enters the fleet in 2020.

Like this article?

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email

Donate to Maritime Fairtrade

Your support helps sustain our extraordinary level of research and publication, enabling millions of readers to learn more about the maritime industry and make informed decisions. Thank you for your support.

This is a secure webpage.
We do not store your credit card information.

Related STORIES